Dynamic Fluid Components Main PageProgressive Power & Control Home Page

Dynamic Fluid Components Hydraulic Motors

BMER Geroler Hydraulic Motor

The BMER-2 is an update of the BMER-1 motor series with larger radial bearings intended to increase side load capacity.

  • Geroler gear set
  • High-speed distribution flow
  • High pressure
  • Can handle high axial and radial forces
  • Smooth operation during low pressure start up and high pressure operation
  • Mounting flange: wheel mount or magneto mount
  • Drive shafts: 1" keyed, 1.25" keyed, 1.5" keyed, 1.5" tapered, 6B spline, 14-tooth spline
  • Rotation: clockwise or counter-clockwise

Dynamic Fluid Components BMER Geroler Hydraulic Motor

Model numbers:

  • BMER-2-125
  • BMER-2-160
  • BMER-2-200
  • BMER-2-230
  • BMER-2-250
  • BMER-2-300
  • BMER-2-350
  • BMER-2-375
  • BMER-2-475
  • BMER-2-540
  • BMER-2-750

BMH RolorTorc Hydraulic Motor

  • Compact and low weight (23 to 28lbs)
  • Quiet operation
  • ROLORTORC gear set
  • High torque at low speed
  • Can be used in series or parallel
  • Mounting flange: Magneto or SAE A 2-bolt
  • Drive shaft: 1.25" parallel key, SAE 6B spline, 1.25"-14 DP spline
  • Ports: 1/2" NPTF, 7/8"-14 SAE

BMH Hydraulic Motor with RolorTorc gear set

Model numbers:

  • BMH-200
  • BMH-250
  • BMH-315
  • BMH-400
  • BMH-500

BMK6 RolorTorc Hydraulic Motor

  • ROLORTORC gear set
  • DISC distribution flow
  • High-pressure
  • Can handle high axial and radial forces
  • Smooth operation during low pressure start up and high pressure operation
  • Mounting flanges: SAE CC, Wheel
  • Drive shafts: 1.5" parallel key, 17-tooth spline, 1.75" tapered, 40mm parallel key
  • Crossover to Char-Lynn 6000

BMK6 Hydraulic Motor with RolorTorc gear set

Model numbers:

  • BMK6-200
  • BMK6-250
  • BMK6-315
  • BMK6-400
  • BMK6-500
  • BMK6-630
  • BMK6-800
  • BMK6-1000

BMM - Rotortorc Hydraulic Motor

  • Rotortorc gear set
  • Shaft distribution flow
  • Compact and light weight (4 to 5lbs)
  • Low speed, high torque (LSHT)
  • Can be used in parallel or series
  • Circle flange or 2-bolt mounting
  • Side port or back port
  • Straight key or tooth spline

BMM Hydraulic Motor with RotorTorc gear set

Model numbers:

  • BMM-8
  • BMM-12.5
  • BMM-20
  • BMM-32
  • BMM-40
  • BMM-50

BMRS - Rolortorc Hydraulic Motor

  • ROLORTORC gear set
  • Shaft distribution flow
  • Compact, low noise
  • Low speed, high torque (LSHT)
  • Radial needle bearings available for side load applications
  • Mounting flanges: SAE A 2-bolt, SAE A 4-bolt, magneto
  • Drive shafts: 1" Woodruff key, SAE 6B spline, 1" parallel .40 diameter cross hole, 1" parallel .31 diameter cross hole
  • Port sizes: 1.25" NPTF, 7/8"-14 SAE, manifold
  • Free-running or load-bearing

BMRS Rotortorc Hydraulic Motor

Model numbers:

  • BMRS-50
  • BMRS-80
  • BMRS-100
  • BMRS-125
  • BMRS-160
  • BMRS-200
  • BMRS-250
  • BMRS-315
  • BMRS-375

BMPH Rotortorc Hydraulic Motor

  • Rotortorc™ gear set
  • Shaft distribution flow
  • Low speed, high torque (LSHT)
  • Compact and lightweight - 14 to 18lbs
  • Mounting flanges: SAE A 2-bolt, SAE A 4-bolt
  • Drive shafts: 1" Woodruff key, SAE 6B spline, 1" parallel .40 diameter cross hole, 1" parallel .31 diameter cross hole
  • Port sizes: 1.25" NPTF, 7/8"-14 SAE, manifold
  • Free-running, 1800lb radial load-bearing, reverse rotation

BMPH Rotortorc Hydraulic Motor

Model numbers:

  • BMPH-36
  • BMPH-50
  • BMPH-80
  • BMPH-100
  • BMPH-125
  • BMPH-160
  • BMPH-200
  • BMPH-250
  • BMPH-315
  • BMPH-400

BMSY Rolortorc Hydraulic Motor

  • ROLORTORC™ gear set
  • DISC distribution flow
  • High-pressure shaft seals
  • Mounting flanges: SAE A 2-bolt, SAE A 4-bolt, magneto, wheel mount
  • Port sizes: 7/8"-14 SAE, 1.0625"-12 SAE
  • Drive shafts: 1" Woodruff key, SAE 6B spline, 1" parallel key, 1.25" parallel key, 1.25" tapered, 1.25"-14 DP spline, 6 spline PTO
  • Wheel motor version available as replacement for Char-Lynn 2000 Series

BMSY Rolortorc Hydraulic Motor

Model numbers:

  • BMSY-80
  • BMSY-100
  • BMSY-125
  • BMSY-160
  • BMSY-200
  • BMSY-250
  • BMSY-315
  • BMSY-400
  • BMSY-475
  • BMSY-80 WE-T4-S
  • BMSY-100 WE-T4-S
  • BMSY-125 WE-T4-S
  • BMSY-160 WE-T4-S
  • BMSY-200 WE-T4-S
  • BMSY-250 WE-T4-S
  • BMSY-315 WE-T4-S
  • BMSY-80 WE-D-S
  • BMSY-100 WE-D-S
  • BMSY-125 WE-D-S
  • BMSY-160 WE-D-S
  • BMSY-200 WE-D-S
  • BMSY-250 WE-D-S
  • BMSY-315 WE-D-S
  • BMSY-80 WE-G-S
  • BMSY-100 WE-G-S
  • BMSY-125 WE-G-S
  • BMSY-160 WE-G-S
  • BMSY-200 WE-G-S
  • BMSY-250 WE-G-S
  • BMSY-315 WE-G-S
  • BMSY-80 WE-F-S
  • BMSY-100 WE-F-S
  • BMSY-125 WE-F-S
  • BMSY-160 WE-F-S
  • BMSY-200 WE-F-S
  • BMSY-250 WE-F-S
  • BMSY-315 WE-F-S
  • BMSY-80 WE-D-ED
  • BMSY-100 WE-D-ED
  • BMSY-160 WE-D-ED
  • BMSY-200 WE-D-ED
  • BMSY-315 WE-D-ED
  • BMSY-80 WE-G-ED
  • BMSY-100 WE-G-ED
  • BMSY-125 WE-G-ED
  • BMSY-160 WE-G-ED
  • BMSY-200 WE-G-ED
  • BMSY-250 WE-G-ED
  • BMSY-315 WE-G-ED
  • BMSY-400 WE-G-ED
  • BMSY-400 WE-T4-S
  • BMSY-400 WE-D-S
  • BMSY-400 WE-G-S
  • BMSY-80 WE-T4-ED
  • BMSY-100 WE-T4-ED
  • BMSY-125 WE-T4-ED
  • BMSY-160 WE-T4-ED
  • BMSY-200 WE-T4-ED
  • BMSY-250 WE-T4-ED
  • BMSY-315 WE-T4-ED
  • BMSY-400 WE-T4-ED
  • BMSY-80 WE-F-ED
  • BMSY-100 WE-F-ED
  • BMSY-125 WE-F-ED
  • BMSY-160 WE-F-ED
  • BMSY-200 WE-F-ED
  • BMSY-250 WE-F-ED
  • BMSY-315 WE-F-ED
  • BMSY-400 WE-F-ED

BMT-BMTS Rolortorc Hydraulic Motors

  • ROLORTOR gear set
  • DISC distribution flow
  • Output shaft: tapered roller bearings
  • Mounting flange: 4-bolt
  • Drive shafts: 1.25" parallel key, 1.5" parallel key, 1.25"-14 DP spline, 1.5"-17 DP spline
  • Port size: 1.0625"-12 SAE
  • Free running option

BMT and BMTS Rolortorc Hydraulic Motors

Model numbers:

  • BMT-160
  • BMTS-160
  • BMT-200
  • BMTS-200
  • BMT-250
  • BMTS-250
  • BMT-315
  • BMTS-315
  • BMT-400
  • BMTS-400
  • BMT-500
  • BMTS-500
  • BMT-630
  • BMTS-630
  • BMT-800
  • BMTS-800

BMV Rolortorc Hydraulic Motor

  • ROLORTOR gear set
  • DISC distribution flow
  • Output shaft: tapered roller bearings
  • Mounting flange: 4-bolt
  • Drive shafts: 2.125" 16 DP spline, 2.25" parallel key, 2.25" tapered
  • Port size: 1 5/16"-12 SAE
  • Free running option

BMV Rolortorc Hydraulic Motor

Model numbers:

  • BMV-315
  • BMV-400
  • BMV-500
  • BMV-630
  • BMV-800
  • BMV-1000

Links to other Dynamic Fluid Components hydraulic products