Sunfab Main PageProgressive Power & Control Home Page

Sunfab Hydraulic Dual Flow Pumps

Sunfab SCPD 56/26 DIN Dual Flow Pump

A double pump capable of dual flows of different sizes. It can be mounted directly on gear boxes equipped with engageable and disengageable power take-offs. Available in left or right rotation.

Sunfab SCPD 56-26 dual flow pump with DIN connector

  • 56.0 and 26.0 cmᶟ ⁄rev
  • Maximum working pressure of 400 bar
  • High self-priming speed
  • Low noise level
  • O-rings on all contact surfaces
  • Double shaft seals

Part Numbers:

  • SCPD-56/26R-V-DL4-L35-S0S-200
  • SCPD-56/26L-V-DL4-L35-S0S-200

Sunfab SCPD 56/26 DIN Dual Flow Pump with Bypass Valve

This flexible compact pump offers two separate flows and a bypass valve directly mounted on it. It's an excellent choice for mobile equipment in need of operating equipment while moving. The bypass valve takes the load off ofthe pump and power take-off when oil is not needed. The bypass valve has very low pressure drop, making it energy efficient. This pump is primarily intended for engine-mounted power take-offs.

Sunfab SCPD Dual Flow Pump with Bypass Valve and DIN connrector

  • The By-Pass valve offers an emergency stop capability by relieving the load from the full operating pressure of 400 bar.
  • The valves 24V solenoids have integrated electrical cables which meet protection class ADR

Part Numbers:

  • SCPD-56/26R-V-DL4-L35-S0S-200
  • SCPD-56/26L-V-DL4-L35-S0S-200
  • Double by-pass valve is ordered seperately

Sunfab SLPD 20/20-64/32 DIN Double Pump

These in-line dual flow pumps comes in eight different sizes. Three of the models feature differentiated flows and can provide three separate flows including a combined flow. Its small form factor makes direct mounting on the power take-off possible in confined spaces. This pump can also be installed using a frame bracket via an intermediate shaft. It offers a cost-effective option to a conventional installation using two separate pumps with a splitter gear box.

Sunfab Double Pump model SLPD 20/20-64/32 with DIN connector

  • Good for demanding mobile hydraulics
  • Maximum pressure of 330-350 bar
  • Extremely low noise
  • Independent direction of rotation
  • Smooth operation over the entire speed range
  • O-rings on all contact surfaces
  • Double shaft seals

Part Numbers:

  • SLPD-20/20W-N-DL4-L35-S4S
  • SLPD-28/28W-N-DL4-L35-S4S
  • SLPD-40/20W-N-DL4-L35-S4S
  • SLPD-35/35W-N-DL4-L35-S4S
  • SLPD-56/28W-N-DL4-L35-S4S
  • SLPD-46/46W-N-DL4-L35-S4S
  • SLPD-53/53W-N-DL4-L35-S4S
  • SLPD-64/32W-N-DL4-L35-S4S

Sunfab SLPD 20/20-64/32 DIN Dual Flow Pump with SAVTEC Oil Control Valve

This dual flow pump equipped with a SAVTEC shut-off valve allows you to control the pump so that it only delivers oil when it is required. The Savtec valve can be remotely controlled with electrical 24V or pneumatic. The control signal is sent from a panel switch or automatically from components such as a the parking brake, pressure sensor or diode gate. When the Savtec valve is inactive it does not load the power take-off, improving fuel economy. The pump contains additional lubrication ducts on the bearings which lubricate even when the Savtec-valve closed. The pump is available in eight different sizes and three of those models feature differentiated flows that can provide three different flows. It offers a cost-effective option to a conventional installation using two separate pumps with a splitter gear box.

Sunfab SLPD 20/20-64/32 Dual Flow Pump with SAVTEC Oil Control Valve and DIN connector

  • Max pressure is 330-350 bar
  • Independent direction of rotation
  • Low noise level
  • Smooth operation over the entire speed range
  • O-rings on all contact surfaces
  • Double shaft seals eliminate oil leakage from the pump and power take-off
  • The Savtec valve can also be used as an emergency stop

Sunfab SLPD 40/20-64/32 Double Pump with SAE Connector

Part Numbers:

  • SLPD-20/20W-V-DL4-L35-S4S-4
  • SLPD-28/28W-V-DL4-L35-S4S-4
  • SLPD-40/20W-V-DL4-L35-S4S-4
  • SLPD-35/35W-V-DL4-L35-S4S-4
  • SLPD-56/28W-V-DL4-L35-S4S-4
  • SLPD-46/46W-V-DL4-L35-S4S-4
  • SLPD-53/53W-V-DL4-L35-S4S-4
  • SLPD-64/32W-V-DL4-L35-S4S-4

Sunfab SLPD 40/20-64/32 Double Pump with SAE Connector

A series of five different sizes of in-line double pumps with SAE-C shafts and flanges. Its small footprint allows direct installation on the power take-off in tight spaces, or it can be installed on frame mountings via an intermediate shaft.

  • Low noise level
  • Smooth operation over the entire speed range
  • O-rings on all contact surfaces
  • Double shaft seals eliminate oil leakage from the pump and power take-off

Part Numbers:

  • SLPD-40/20W-N-SC4-C14-S4S-0
  • SLPD-35/35W-N-SC4-C14-S4S-0
  • SLPD-56/28W-N-SC4-C14-S4S-0
  • SLPD-46/46W-N-SC4-C14-S4S-0
  • SLPD-53/53W-N-SC4-C14-S4S-0
  • SLPD-64/32W-N-SC4-C14-S4S-0

Sunfab SCPD 76/76 Dual Flow Pump with DIN Connection

A dual flow pump with two separate, equal flows and a maximum flow of 254 liters per minute. This compact pump can be mounted directly on gear boxes equipped with engageable and disengageable PTOs. Available in left or right rotation.

Sunfab Dual Flow Pump with DIN Connection - model SCPD 76/76

  • Maximum flow of 127 + 127 = 254 lit/min
  • Maximum working pressure of 350 bar

Part Numbers:

  • SCPD-76/76L-N-DL4-L35-S0S-200
  • SCPD-76/76R-N-DL4-L35-S0S-200

Links to other Sunfab Hydraulic products