Moog Ohio Oscillator Rotary Actuators

Progressive Power & Control is an Indiana distributor of Moog Ohio Oscillator hydraulic actuators.

H Series Moog Ohio Oscillator Actuators

• 2000 psi max. for heavy duty hydraulic use
• 1200 to 478,000 lb-in = torque range @ 2000 psi
• 100, 190, 280, 370 degrees od standard rotation
• High volumetric efficiency with zero leakage
• Mechanically efficienct rack & pinion system
• High load capacity with tapered roller bearings
• Piston seals
• Single tooth gearing
• Thru shaft
• Operating temp of 0 to 200° F

H Series Options

• Adjustable Cushions
• Stroke Adjustors
• Combined Cushion and Stroke Adjustor
• NPT or SAE O-Ring Ports
• Flexible mounting options
• Multiple shaft configurations
• Custom rotational arcs
• Hydraulic air bleeds

HH Series Actuators

• 2000 psi max. for heavy hydraulic uses
• 1.0 to 50 million lb-in @ 3000 psi max = torque range
• 100, 180, 270, 360 degree standard rotations
• Zero leakage
• Efficient rack & pinion
• Custom bearings per application
• Single tooth gearing
• Coupling and alignment - hollow shaft
• 0 to 200° F operating temps

HH Series Options:

• Adjustable Cushions
• Mill-type or tie rod cylinders
• User-selectd rotational arcs
• Flexible mounting
• Multiple shaft configurations
• Multiple end cap valves and ports
• On-board power units

Series H and HH Actuator Features

Degrees of Rotation

• 100
• 190
• 280
• 370

End-cap Options

Stroke Adjustors - internal and external screw-type adjustable stops at end of rotation. Used to set the exact final position of the end of stroke.

Cushions - adjustable and fixed

Cushions protect the actuator from impact damage at the end of rotation. Cushions also help create smooth deceleration, external energy absorption and noise reduction, and block the discharge port, trapping fluid at the end of the stroke. Double rack adjustor & cushion combos also available.

Mounting Options

• Front face mount
• Bottom face mount
• Back face mount
• Top face mount
• Front flange mount
• Bottom flange mount
• Back flange mount
• Top flange mount
• Front and back face mount

Shaft Options

• Hollow keyed
• Hollow internal spline
• Male spline
• Female spline
• Single end square
• Single end keyed
• Single end external spline
• Double end with both ends keyed
• Double end with external splines
• Double end both square

Port Options

• End ports with NPT threads
• End ports with SAE threads
• Side ports with NPT threads
• Side ports with SAE threads

Seals

• Nitrile - Buna N standard
• Fluoroelastomer - Viton

Moog Ohio Oscillator Part Numbers: