Poclain Hydraulics - Flow Control Valves

Poclain flow control valves are 2 or 3 way pressure compensated valves and include throttle/check valves, flow dividers, 3-way, and bi-directional flow dividers

Poclain VP-NDV Flow Control Valve - Throttle with Check Valve

VP-NDV throttle-check valve contains two throttling spools and two check valves contained in a housing. They can be used for throttling the the hydraulic fluid in the pilot and main flow of the A and B lines.

Sizes: 6 and 10
For flow control in both service lines
For throttling in supply and return lines
For vertical stacking using sandwich plate design
Height and width of the valves to ISO 7790 norms
Connection: ISO 4401
Max. pressure: bar 350 / PSI 5075
Max. flow: l/min 100 / GPM 26.4

Poclain Hydraulics throttle/check flow control valve

Poclain TVD-6 Flow Control Valve

TVD flow control valves are used to control hydraulic fluid flow independent of the inlet or outlet pressures, maintaining a constant, controlled flow irregardless of change of pressure.

Size: 6
Connection: ISO 6264
Max. pressure: bar 350 / PSI 5075
Max. flow: l/min 16 / GPM 4.2
Two - way pressure compensated
Connecting dimensions to ISO 6264
Operated by rotary knob / roller
Available with or without built-in non-return valve

Poclain Hydraulics TVD-6 flow control valve

Poclain TVTC Flow Control Valve - 3-way Compensated

This 3-way compensated flow control valve allows you to set a consistent fluid flow independent of any pressure variations. Excess flow is routed to be used as another power port or tank return port.

Size: 6
Connection: ISO 117
Flow Divider9 and ISO 11926
Max. pressure: bar 350 / PSI 5075
Max. flow: l/min 50 / GPM 13.2
Three-way pressure compensation
Operated by rotary knob
Threaded connections to ISO 1179 and ISO 11926
Options:
- Without relief valve and non-return valve
- With relief valve
- With non-return valve

Poclain Hydraulics TVTC 3-way compensated flow control valve

Poclain TVTP-B Flow Control Valve - 3-way Flow Regulator

TVTP-B (and TVTP-P) three-way flow regulators control priority flow to a maximum adjustable level independent of pressure and load levels. Surplus flow is diverted to the bypass port, which may be used to run another hydraulic circuit. The valve works as two-way regulator even if the pressure in the secondary circuit is higher than in the priority (regulated) circuit.

Size: 6 and 10
Max. pressure: bar 350 / PSI 5075
Max. flow: l/min 90 / GPM 23.8
Three-way pressure compensated
Operated by rotary knob
Fits into a block

Poclain Hydraulics TVTP 3-way flow regulator

Poclain TVTP-P Flow Control Valve - 3-way Flow Regulator

Sizes: 6 and10
Max. pressure: 210 Bar / 3046 PSI
Max. flow: 90 l/min / 23.8 GPM
Three-way pressure compensated
Operated by proportional solenoid
Control electronics: Amplifier P/N: 1659574
Fits into a block
Plug-in connector for solenoids to ISO 4400

Poclain DTP Flow Control Valve - Flow Divider/Combiner

DTP flow dividers divide and combine flow of hydraulic fluid at a 50/50 ratio independent of pressure.

Sizes: 6 and10
Max. pressure: 350 Bar / 5.076 PSI
Max. flow: 70 l/min / 18.49 GPM
Dividing and combining of flows independent of pressure
Dividing and combining ratio: 50% / 50%
Direct in-line mounting
Threaded connections: ISO 9974, ISO 1179, ISO 11926

Poclain Hydraulics DTP flow divider and flow combiner

Poclain FDB20 Flow Control Valve - Bi-directional Flow Dividers

These bidirectionnal flow dividers (FDB20 and FDB25) control the speed between wheels of the same axle or between different axles by dividing or combining the flow. They are equipped with an electric or hydraulically-controlled by-pass for use in open or closed loop circuits.

Connections: ISO 1179 and ISO 11926
Max. pressure: bar 450 / PSI 6525
Max. flow: l/min 150 / GPM 39.6
Direct in-line mounting

Poclain Hydraulics FDB20 and FDB25 bi-directional flow divider pressure compensated

Poclain FDB25 Flow Control Valve - Bi-directional Flow Dividers

Direct in-line mounting or direct mounting to pump
Threaded connections: ISO 1179 and ISO 11926
Max. pressure: bar 450 / PSI 6525
Max. flow: l/min 300 / GPM 79.3

Links to Other Poclain Products