Diverter Valve – model SV80
Diverter Valve – model DV80
Manual Directional Control Valve – model 180
Product Description
Diverter Valve – model SV80
As an alternative to using a directional control valve, a diverter valve is adequate when there is no need for a neutral position. Flows can be quickly switched between two lines, allowing fast switches from one system to another, or from a system to the reservoir, creating an idling circuit. Flow may be directed two ways: mechanically pushing the spool with spring offset or mechanical push pull operation with an adjustment knob.
- Maximum Flow: 20 gpm, Maximum Pressure: 3000 psi
- Ports: 1/2” BSPP, 7/8” -14UN #10 SAE ORB, M22 x 1.5, 1/2” NPTF
- Operation: Spring Offset, Mechanical Push – Manual, Push – Pull – Threaded, Push – Pull
Diverter Valve – model DV80
Allows the flow to be diverted mechanically by an offset spring pushing the spool. The spool and spring are contained in a sealed housing to prevent environmental corrosion. Available in one spool or two spool versions. The 2-spool version allows you to divert flow from one circuit to another or to a hydraulic fluid reservoir. A wide variety of spool ends and port threading are available.
- Maximum Flow: 20 gpm, Maximum Pressure: 3000 psi
- Ports: 1/2” BSPP, 7/8” -14UN #10 SAE ORB
- Operation: Roller, Ball, Manual
Manual Directional Control Valve – model 180
A rotary spool type directional control valve which contains a rotor that rotates relative to body of the valve. Inlet and outlet ports can be connected in many different flow patterns to control pressurized fluid for start, stop or directional changes. Webster’s flat rotors compensate for valve wear, creating near zero-leak through the life of the valve. Available with 7 different flow patterns, 3 flow ratings and several porting options. These valves may be mounted on a manifold, on a panel or used inline on the hydraulic circuit. Manual control is achieved using ball handles, spring centering and detents.
- Valve can be used in series without drain up to a max working pressure of 3600 psi.
- Flow Ranges: up to 10 gpm, three sizes available
- Maximum Pressure: up to 10000 psi
- Ports: SAE, BSPP & Manifold Mount
