Product Description
The Spartan Scientific Stepper 6 stepper valve is a self-contained Media Separated Electronic Proportional Flow Control Valve designed for highly accurate electronically controlled variable flow control of inert fluids and gases. Applying analog input signals to built-in control circuit of the stepper valve, it is possible to produce linear variable flow output. The stepper valve can control its flow by using 1,500 positions through its valve stroke range which can be dialed down to the step, creating reliable and repeatable flow rates from 0 to 6.5 GPM (water) @ 120 PSI.. The valve features a built-in electronic control that accommodates either open or closed loop control by use of electronic signal input of either 4 to 20 mA, 0 to 10 Volt DC. Valve standard operating voltages are 12 or 24 VDC. The Stepper 6 has a separating diaphragm that maintains dry mechanical movement and is designed for long life and high flow. The diaphragm is designed with a specialized convolution and elliptical flow tip producing a linear flow versus valve stroke position. The Stepper 6 valve body is available in 1/8”or 1/4” port sizes with a maximum flow orifice of 6 mm. Featuring multi orientation mounting and the quick connect M12 connector mates to the valve for a sure environmentally resistant enclosure to NEMA4 / IP65. This energy saving valve uses voltage to move into position and needs only 60mA when position is found and maintains a steady state. For fast troubleshooting, the on-board indicator LED (RGB) light ring displays status of the device.
